TIMING CHAIN TOOL SET CAMSHAFT LOCKING TOOL FOR BENZ M254 M256

ES.HTL-1360-6

• Application: Compatible with Mercedes-Benz M256 M254 1.5 Engine S Series
  Function: Used to remove the engine camshaft adjuster to time the M254 M256 engine
  Durable: Made of high quality steel, high hardness, wear resistance, strong and durable, the surface is plated with anti-rust layer to prevent rust
  OEM Equivalent Part Number: W256589002300, W256589023100, W654589004000, W654589002100, W177589010900, W654589032101

8PCS CAMSHAFT CRANKSHAFT ENGINE TIMING BELT TOOLS FOR VOLVO 3.0 3.2 T6 S80 XC90 XC60 XC70 LAND ROVER 3.2 I6 SK1128

ES.HTL-1362-6

• Application: Compatible with Volvo B6304/B6324 engine/3.0 3.2(T6 engine) S60(2011~), S80(2006~), V60, V70(2007~), XC60, XC90(2007~); Compatible with Land Rover 3.2 i6 (2006-2014)
  Function: Designed to align the engine camshaft and camshaft position, and correct into the side cover
  OEM Equivalent Part Number: Compatible with Volvo, include: 9997257, 9997261, 9997263, 9997264, 9997272, 9997271, 9997266, 9997267; Compatible with Land Rover, include: 303-1225, 303-1226, 303-1219, 303-1223

FOR FORD F150 MUSTANG 5.0 COYOTE V8 ENGINE FLYWHEEL CAMSHAFT CRANKSHAFT LOCKING VALVE SPRING COMPRESSOR TIMING TOOL SET

ES.HTL-1363-6

• Application: This timing tool is compatible with Ford Mustang F150 5.0L Coyote engine, Partial accessory are compatible with Ford 4.6L 5.4L 5.2L 5.8L 6.2L 6.8L engine(Please see details below)
  Function: Used to hold the cams ensure camshaft alignment when replace timing chain; Designed to compress valve springs and replace valves, springs, and retainers, etc; and used to hold crankshaft for correct timing chain installation
  OEM Equivalent Part Number: 303-448, T93P-6303-A, 6024, 525219
  High Quality Material: Made of high quality steel and has been forged and heat-treated multiple times, it is very sturdy and durable, and also has the characteristics of anti-corrosion, which is not easy to damage, will extend the service life
  A Complete Set: This is a complete set, including camshaft alignment holding tool, flywheel flexplate holding locking tool, crankshaft positioning tool, valve spring compressor tool，magnetic screwdriver, 4pcs bolts and 1pc 3/8" long bolt

TOOLS IN CITROEN PEUGEOT 1.0 1.2 TIMING TOOL 5 PIECE SET

ES.HTL-1364-6

• ngine: code: 1.0, 1.2 VTi petrol engine: EBO (ZMZ), EB2 (HMZ)
  For Checking and setting the camshaft and crankshaft in correct TDC position
  Applicable: peugeots 208 (2008); citroens C3 (2012~)
  OEM#: 0109-2A, 0109-2B

ENGINE TIMING TOOLS CHECK USEFUL KIT CALAGE 1.2 GDI DISTRIBUTION SYNCHRONIZATION PURETECH FOR PSA

ES.HTL-1365-6

• Timing Locking Compatible With Citroen,
  Compatible With Peugeot,
  Compatible With Opel from 2018
  1.2 Vti (VVT) / GDI PureTech GASOLINE - 3 Cylinders
  Engines: EB2 from 2018.
  from 2018 have been updated to facilitate timing replacement.

  The kit includes tools that replace Compatible With Citroen OEM factory tools:
  1. Left camshaft locking tool to be used as OEM 109-2C
  2. Locking the right camshaft to be used as OEM 109-2D
  3. Locking the flywheel (crankshaft) OEM 109-2B (Compatible With Opel EN-52127-2)
  EB2 Engines - 3 Cylinders from 2018:

41MM WATER PUMP WRENCH TIMING BELT TENSION SPANNER GM CHEVROLET OPEL CRUZE AVEO CAMSHAFT LOCKING TOOLS FOR AUTOMOTIVE MECHANIC

ES.HTL-1366-6

• 41mm Water Pump Wrench
  GM Chevrolet Opel Cruze Aveo

9PCS ENGINE TIMING TOOL KIT FOR BUICK CHEVROLET FIAT CRUZE VAUXHALL OPEL

ES.HTL-1367-6

• WIDE COMPATIBILITY: This OEM equivalent engine camshaft alignment timing locking tool set is compatible with a wide range of 2003 to 2015 Alfa Romeo, Chevrolet, Fiat, Opel / Vauxhall, and Saab 1.4, 1.6, and 1.8 L engines
  QUALITY BUILD: Our heavy-duty camshaft holding tools are made from premium carbon steel with zinc plating and black oxide coating and aluminum alloy to provide superior wear and corrosion resistance for resilient service
  EASY PORTABILITY: These camshaft and crankshaft alignment tools by Orion Motor Tech come with a rugged storage case, keeping everything organized and easy to store or transport between jobs

TIMING TOOL KIT FOR CUMMINS QSX15 ISX QSX ALTERNATIVE TO 3163021 3163069 3163530

ES.HTL-1368-6

• Application: Compatible with Cummins ISX engines (2016-2017) and X15, 6 deg wedge is included for 2007-2012 engines with two camshafts.OEM Equivalent Part Number: 3163020; 3163021; 3163069; 3163530
  As Accurate As the OEM: this kit work just as good as the Cummins tool, Everything fit perfectly which allowed you to remove, fix, and put back together and set the timing on ISX QSX engine ! will help you saving thousands in repair costs
  Durable and Strong: This Cummins ISX QSX timing tool made of heavy duty steel, weight 7.98lb, the exterior has been blackened and anti-oxidation, not easy rust
  Kit Include 8pc: 1pc Jake Brake Tool (7MM) feeler gauge; 1pc Cam Gear Puller (3163069); 1pc Crank Pin (3163020); 1pc 4 deg Wedge; 1pc 5 deg Wedge; 2pc 6 deg Wedges; 1pc 7 deg Wedge, and all the tool put in a plastic suitcase, easy to strage

AUTO TOOL FOR GEELY 4G20 ENGINE TIMING TOOL

ES.HTL-1369-6

• Geely 4G20

DIESEL ENGINE CHAIN LOCK TIMING TOOL FOR MERCEDES BENZ GLE300D 2.2 DIESEL OM651 TIMING TOOL

ES.HTL-1370-6

• Function: locking the camshaft in right position when adjust or replace timing chain, The retaining device use for turning, installing, and removing the crankshaft pulley
  Application Vehicle Include: Compatible with Mercedes-Benz OM651 1.8, 2.0D, 2.2D, 2.5D engine, Compatible with Mercedes-Benz Vito 113 CDI, W176, W246 , A180 CDI , A180 CDI BlueEFFICIENCY, A 200 CDI ,A 200 CDI BlueEFFICIENCY, W / S 204 C180 CDI C180 CDI BlueEFFICIENCY, C200 CDI ,C200 CDI BlueEFFICIENCY, W / V 447 V 200CDI, C117 CLA 200 CDI, X 156 GLA 200 CDI, A 176 A 200 CDI, W 246 B 200 CDI
  Application Vehicle Include: W / S 212 E 200 CDI, E 200 CDI BlueEFFICIENCY ,E200 BlueTec, W / V 639 Viano 2.0 CDI, X 204 GLK 200 CDI BlueEFFICIENCY, W / V 639 Vito110 CDI, W906 Sprinter210 CDI, 310 CDI, 510 CDI Sprinter210 BlueTec, 310 BlueTec, 510 BlueTec, Sprinter 213 CDI, 313 CDI,513 CDI Sprinter 213 BlueTec, 313 BlueTec, 413 BlueTec , 513 BlueTec
  Engine Codes: 651.901, 651.910, 651.911, 651.912, 651.913, 651.916, 651.922, 651.924, 651.925, 651.930, 651.940, 651.955, 651.956, 651.957, 651.960, 651.961, 651.980 (2009-2014)
  OEM Equivalent Part Number; W 651 589 02 63 00, W 651 589 01 40 00, W 651 589 00 40 00, 60831850, 60831800, 60831820, 60831810, 60831830.

MERCEDES MAYBACH M276 ENGINE TIMING GEAR RETAINER CAMSHAFT SPROCKET SCREW REMOVAL TOOL SET

ES.HTL-1371-6

• Precise Disassembly: Timing gear retainer kit is equipped with T100 camshaft socket for accurate & easy removal. T100 socket is compatible with Mercedes Benz M133 M270 M271 M276 M278 engines
  Reliable & Long-Lasting: This camshaft sprocket retainer tool is made of high-quality materials, high strength & wear-resistant, impact-resistant, not easy to break, reliable & long service life
  Package Content: Timing gear holder kit includes 2 x camshaft sprocket retainers, 1 x T100 camshaft socket, 4 x fixing bolts, 1 x wrench. Comes with storage case for easy storage & quick transport

FOR MERCEDES BENZ W204 M157 M276 M278 PETROL CAMSHAFT ADJUSTER HOLDING TOOL SET ENGINE TIMING TOOL FOR AUTOMOTIVE MECHANIC

ES.HTL-1372-6

• Application: This kit include camshaft timing tool, fuel injector remover, camshaft adjuster tool and fuel injector seal install tool. The camshaft align tool compatible with BENZ M157 M276 M278. The fuel injector remover compatible with BENZ M133 M152 M157 M270 M274 M276 M278. The camshaft adjuster tool compatible with BENZ M157 M276 M278 engine. The fuel injector seal install tool compatible with BENZ M133 M152 M157 M270 M274 M276 M278 engine.
  Combination Kit: Camshaft timing tool specially designed to align the camshaft timing angle for correct position for M157 M276 M278, fuel injector remover easy to remove injector in M133 M152 M157 M270 M274 M276 M278, camshaft adjuster tool is used to mark correct position to align the camshaft for M157 M276 M278 engine
  OEM Equivalent Part Number: 276589014000, 278589002300

FUEL INJECTOR TOOLS OIL SEAL INSTALLATION REMOVER TOOL REPAIR KIT FOR BMW N55 N63 S55 S63 B38 B48

ES.HTL-1373-6

• Application: Compatible with BMW N13 N14 N18 N20 N26 N43 N53 N54 N55 N63 N74 S55 S63
  Function: If fuel injector oil seal is aging, which will cause fuel leakage, so it needs to be replaced with a new injectors seal, this tool specially designed for removing and installing the injectors seal
  Professional Fuel Injector Seal Install Remove Tool: This tools set to enable the operator to correctly fit the seal (or ring) onto a BMW fuel injector prior to refitting the fuel injector to the cylinder head.The seal material is designed to expand once installed into the injector bore to enable an effective seal
  OEM Equivalent Part Number: 130280, 130281, 130282, 130283, 130190, 130191, 130192, 130193, 130194, 130195, 83300495756

CAMSHAFT TIMING FLYWHEEL HOLDER TOOL FUEL INJECTOR REMOVER KIT COMPATIBLE WITH BMW N20 N26 ENGINE

ES.HTL-1374-6

• Combinnation Kit: This kit include camshat timing tool, balance shaft tool, flywheel holder tool, fuel injector removal tool, all the tools together put in one case, complete tool will make you repair more convenient
  Timing Tool: Designed for ficing the camshaft in right position, use the tool to dismantle and assemble intake and exhaust camshaft, compatible with BMW N20 N26 engine
  Balance Shaft Tool: Specially designed to align the balance shaft and fixing the sprocket and chain tensioner, compatible with BMW N20 engine
  Flywheel Holder Tool: Specially designed for flywheel fixing of transmission before the engine dismantling, compatible with N20 N26 engine
  Fuel Injector Removal Tool: use to pull fuel injector, compatible with BMW N14, N18, N20, N26, N47, N53, N54, N55, N57, N63, S63 engine

DOUBLE VANOS TWIN CAMSHAFT ALIGNMENT ENGINE TIMING LOCKING TOOL MASTER SET DOUBLE VANOS FOR BMW M52TU M54 M56

ES.HTL-1375-6

• Application: Compatible with BMW M52TU M54 M56 engine
  Function: Specially designed for using before installing the accurate engine, to maintain timing position of camshaft and crankshaft
  Accurate Fit: This timing tool perfect fit M52TU M54 M56 engine, we strictly control the accuracy of our products to ensure matching with the engine
  Quality Guarante:This camshaft timing tool made of high quality heavy duty steel, high hardness and strong, not easy to deformed, the surface is coated with an anti-oxidation coating to prevent rust, and we offer 12 months warranty

CAMSHAFT ALIGNMENT TIMING LOCKING TOOL KIT REPLACEMENT FOR 1993-2005 BMW M60 M62 M62TU V8 CAMSHAFT ALIGNMENT TIMING TOOLS

ES.HTL-1376-6

• Application: Compatible with BMW M60 M62 M62 TU Engine, 5 Series (1992- 2003), 7Series (1992- 2002), 8 Series (1993- 1999), X5 (1999- 2004); Compatible with Land Rover (2003-2005), Compatible with Range Rover (2003-2005)
  Function: Used to set and lock the crankshaft and camshaft components of the M60 and M62 VANOS and non VANOS v8 petrol engine
  Engine Code: 3.0 include: 30 8S 1(M60 B30); 3.5 include: 35 8S 1(M62 B35), 35 8S 2(M62 TUB35); 4.0 include: 40 8S 1(M60B40); 4.4 include: 44 8S 1 (M62 B44), 44 8S 2(M62 TUB44); 4.6 include: 46 8S 1(M62 B46)
  OEM Equivalent Part Number: 112445, 112441, 112442, 112446, 113390, 115180, 112300, 116420, 116452, 116451, 113310, 116440, 117380

ENGINE TIMING TOOLS CAR GARAGE TOOLS FOR BMW N51 N52 N53 N54 N55 CAMSHAFT VANOS FLYWHEEL TIMING TOOL SET

ES.HTL-1377-6

• Compatible Vehicles : Applicable to BMW N51;N52 ;N53; N54; N55; S55 Engiens
  Package: 1x Camshaft Crankshaft Timing Locking Tool Kit, 1x blow molding case
  Product Usage: For Installing and removing of camshaft/ variable camshaft timing unit,and fixing timing position of camshaft and crankshaft when replacing or adjusting timing belt or chain and timing the engiens
  Benefit : Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this tool set a long lasting and reliable tool
  E60:523i,523Li,525i,525Li,525xi,528i,528xi,530i,530Li,530xi,535i,535xi E61/E63: 523i,525i,525xi,530i,530xi,535xi,630i E64/E65: 630i,730i E66/E70: 730Li,X5 3.0Si E81/E82: 130i,135is E93: 325i,328i,330i,335i E83: X3 2.5i,2.5Si,3.0i,3.0Si E85/E86: Z4 2.5i,2.5Si,3.0i,3.0Si,Z4 3.0Si E87/E90: 130i,323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi E91: 323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi E92: 323i,325i,325xi,328i,328xi,330i,330xi,335i

CAMSHAFT ALIGNMENT SET ENGINE TIMING TOOLS COMPATIBLE FOR BMW E90 E91 E92 M3 4.0L V8 S65

ES.HTL-1378-6

• Applications: BMW 3 Series (2007 - 2013)
  Engine codes: S65 B40A (4.0L).
  Equivalent to OEM 11 9 970 (camshaft alignment tools), 11 5 320 (crankshaft timing pin), 11 5 290 (Tensioner rail tools made up of 11 5 291 & 11 5 292), 11 5 370 (split camshaft setting tool).

FOR BMW B36 B38 B48 ENGINES FUEL INJECTOR REMOVAL INSTALLATION TOOL KIT

ES.HTL-1379-6

• Application: Compatible with BMW B36 B38 B48 B58 engine, OEM Equivalent Part Number 2358417 2358022
  Function: Specially designed to install and remove the B36 B38 B48 B58 engine injector
  As Fit As OEM: this injector remover installer perfect fit B36 B38 B48 B58 engine, High precision and match exactly engine, we have ovre than ten years professional timing experience, you can don't worry it

TOOL SET FOR BMW X3 X5 X6 REAR DIFFERENTIAL REMOVER & INSTALLER TOOLS WITH 3 SOCKET NUT

ES.HTL-1380-6

• Application: Compatible with BMW E70 E90 E91 E92 X3 X5 X6 RWD 4WD
  OEM Equivalent Part Number: 335040; 335050; 335060; 335080; 230020
  Function: Use to install and remove the screw nut between the rear drive shaft and the differential, it can also be used to replace the differential shaft seal
  Quality Guarantee: Made of high quality heavy duty steel, high hardness and very strong, not easy to break and deform, The exterior is coated with antioxidant layer to prevent rust, extended service life

FOR BMW REAR DIFFERENTIAL AXLE SHAFT REMOVAL TOOL KIT 83300495851 OEM335120

ES.HTL-1381-6

• Function: Used to safely remove and install output shaft in rear axle final drive on the newer vehicles that do not have a flange for the output axles on the rear differential, but rather are a strait press in type, secured with a snap ring
  Compatible with BMW: 1 series: F20, F21; 2 series: F22, F23; 3 series: F30, F31, F34, F35, G20, G21, G28; 4 series: F32, F33, F36; 5 series: F07, F10, F11, F18, F90, G30, G31, G38; 6 series: F06, F12, F13, G32; 7 series: F01, F02, G11, G12; X series: E70, F15, G01; Z series: E38, G29
  Applicable Vehicle: 1 series: for F20 F21 2010-2015, for F20/F21 LCI 2014 -2019; 2 series: for F22 2012-2017, for F22/F23 LCI 2016-2019, for F23 2014-2017; 3 series: for F30 F31 F35 2011-2015, for F30 LCI 2014-2018, for G20 2017-2020, for F31 2014-2019, for G21 G28 2018-2019, for F34 GT 2012-2016, for F34 GT LCI 2015-2020, for F35 LCI 2015-2019; 4 series: for F32 2012-2017, for F32/F33 LCI 2016-2019, for F33 2013-2017, for F36 Gran Coupe 2013-2017, for F36 Gran Coupe LCI 2016-2019 and more
  OEM Equivalent Part Number: 83300495851, 83300495852, 83300495853, 83300495854, 83300495855, 83300495856, 83300495857, 83302360944, 83302240464, 83302406774, 335120, 335121, 335122, 335123, 335124, 335125, 335126, 335127, 2360944, 2240464, 2406774

BMW CRANKSHAFT OIL SEA TOOL SET + N20 + N38

ES.HTL-1382-6

• Application: This crankshaft seal removal kit compatible with BMW N40 N42 N45 N45T N46 N46T N52 N53 N54 N55 engine, OEM Equivalent Part Number: 119181 119182 119183 119184 119185 119220 119230 110370
  Function: This crankshaft seal remover installer function as same as the OEM, which could accurate fit N40 N42 N45 N45T N46 N46T N52 N53 N54 N55 engine
  AS Fit As OEM: Made of heavy duty steel, high hardness and strong, bear high-intensity pressure not easy to deformation and fracture, the exterior is coated with antioxidant layer to prevent rust, extended service life, and all tools put in a suicase, easy to carry and storage
  Material: Made of carbon steel, high quality which can ensure a longer service lifetime

MERCEDES M274 M270 TIMING TOOL AND NOZZLE TOOL

ES.HTL-1386-6

• PROFESSIONAL DESIGN:The camshaft timing tool kit is specifically designed to slacken and tighten the bolts attached to the camshaft gears.
  ACCURATE POSITIONING:Supplied with small & large diameter clamp pieces to ensure the camshaft is correctly held in place.
  OEM NUMBER: 270 589 00 61 00; compatible with Mercedes Benz M270 M274 and for vehicles fitted with the chain driven 1.6/2.0 direct injection petrol engines.

ENGINE LOCKING ALIGNMENT TIMING TOOL SET FOR MERCEDES BENZ S560L M177 M178 M176 4.0 AMG C63 AUTOMOTIVE TOOLS

ES.HTL-1387-6

• Application: Compatible with Mercedes-Benz Maybach AMG C63, C63S is equipped with twin turbocharged 4.0L, gasoline V8 engine, M177, M176, M178 engine
  Function: Used to lock the camshaft at the required timing position, and used for checking and setting the engine timing
  OEM Equivalent Part Number: 177589014000, 177589001500
  High Quality Material: Made of high quality steel and heat-treated for high hardness, durability and resistance to damage, it is also professionally forged and rigorously tested to fit perfectly into the corresponding car models

DIESEL ENGINE TIMING TOOL KIT FOR MERCEDES BENZ M654 M656 OM654 W213 SERIES E220D

ES.HTL-1388-6

• Function: use to lock the camshafat and crankshaft in a right position, when check the timing or replace timing chain
  Applicable Engine: Compatible with Mercedes Benz OM654 1.6 2.0 diesel engine, engine code:1.6L 654.916, 2.0L 654.920
  Applicable Vehicle Incluude: compatible with Benz A Class (from 2019), B Class (from 2019), C Class (from 2018), CLA (from 2019), CLS (from 2018), E Class (from 2016), GLB (from 2019), GLC Coupe (from 2019), GLE (from 2019), V Class (from 2019), Vito (from 2019)
  OEM Equivalent Part Number: W654 589 00 21 00, W654 589 00 40 00, W654 589 01 40 00

ES.HTL-1389-6 

• Function: use for setting the timing when replace timing chain
  Applicable Engine: compatible with Benz M282 engine
  Engine Code: M282.914/H5H/HRA2
  Applicable Vehicle Include: compatible with Benz W177 W247 C118 H247 1.3L 4V engine, compatible with Renault, Dacia, Nissan with TCe turbo engine
  OEM Equivalent Part Number: 282589002300

IN VOLKSWAGEN AUDI 2.4 3.2 2.8 3.0 TIMING INTEGRATED GROUP

ES.HTL-1390-6

• Important Tips: As a honest seller, we must let our user know it, Because the surface treatment process is not very good in before, the product surface looks very dirty. but we have improved the process and strictly checked the quality. Now we have completely solved this problem. Now the surface of the product is not dirty, just like the picture shows, so please don't worry, we can guarantee that now you order product is good
  Application: Compatible with Audi VW Q5 2.0,A6L 2.8 3.0T; A6L/Quattro 2.4 with engine BDW; 6-cyl petrol direct injection 2.8L 4V engine, Mechanics; compatible with Audi VW A4/A6/A8/Q7/R8 3.2 4.2 5.2 FSi with engine AUK
  OEM Equivalent Part Number: 303212, T10172, T40070, T40133, T40058, T40071, T10035, T40069, T3242, T10172-2

EA888 1.8 2.0 TSI TFSI CAMSHAFT CRANKSHAFT ENGINE TIMING TOOL COMPATIBLE WITH AUDI VW 2006-2018 REPLACE T10352 T10368 T40196

ES.HTL-1391-6

• Application Engine: This timing tool is ea888 upgraded version, old version only fit ea888 2006-2013, this new timing tool fit 2006-2018, compatible with VAG series TSI TFSI EA888 1.8 2.0 engine
  Engine Code Include: BYT, BZB, CABA, CABB, CABD, CADA, CAEA, CAEB, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CDAA, CDAB, CDHA, CDHB, CDNB, CDNC, CDND, CESA, CETA, CFKA, CGYA, CJEB, CJBA, CJSB ect
  OEM Equivalent Part Number: T10352; T10368; T40196; T10354; T10060A; T40011; T40098; T40267; T40271
  For Vehicle: Replacement for Volkswagen 2006-2018 EA888 1.8 2.0 TSi TFSi engine vehicle model, Compatible with Audi A3 A4 A5 A6 Q5 TT/ TT Quattro 2.0T; VW Beetle, EOS, GTI, Jetta, Passat B6, Tiguan, CC, Skoda, SEAT, Magotan 2.0T

FOR VW AUDI 4.0 FSI TFSI A6 A8 S6 BENTLEY 4.0T V8 ENGINE CAMSHAFT LOCKING TIMING TOOL FIT T40264

ES.HTL-1392-6

• Function: Specially designed to lock camshaft when adjusting timing
  Application: Compatible with Volkswagen 4.0L TFSi engine, Compatible with Audi A8 since 2010; compatible with Audi A6 since 2011 8 cyl; Compatible with Bentley Flying Spur 4.0T V8 engine
  OEM Equivalent Part Number: T40272, T40269, T40246, T40071
  Easy To Strage: all the tools put in a plastic case, easy to carry, tools made of high quality steel, and have anti-rust treatment, durable and not easy rust

FOR VOLKSWAGEN AUDI 2.4 2.5 3.0 2.8 4.2 5.2 3.2 2.8T 3.0T CHAIN MACHINE INTEGRATED GROUP

ES.HTL-1393-6

• Function: special designed for alignment locking adjusting camshaft, when replacement the timing chain
  Applicable: the camshaft alignment tool compatible with Audi Q5 2.0, A6L 2.8, 3.0T, 3.2T. compatible with Audi A4/A6/A8/Q7/R8 3.2, 4.2, 5.2 Fsi with AUK, A6L/Quattro 2.4 with engine BDW
  OEM Equivalent Part Number: T40133; T40071; T40058; T10172; T40069; T10035; T40079; T40269; T40297; T40070;T40026
  with Camshaft Adjuster Socket Key: use for adjusting and tensioning camshaft, T40079 compatible with VAG 4.2 FSi; T40269 compatible with VAG 4.0 TFSi; T40297 compatible with VAG 3.0
  With Camshaft Sprocket Holder Wrench: replacement for VAG 3036 T10172, designed to hold camshaft or sprocket

ENGINE CAMSHAFT ALIGNMENT LOCKING TIMING TOOL SET FOR VW AUDI 2.8T 3.0T T40133 T40079

ES.HTL-1394-6

• The engine timing chain tool is specially designed for Volkswagen Audi 2.8 3.0T，6-cyl petrol direct injection 2.8L 4V engine;
  Compared with other timing tool sets you want to buy, our tools are more cost-effective. At the same time the price is still very favorable (quality guaranteed).

  T40133
  Specially designed to align camshaft.
  compatible with Audi A6, Q5 2.0T; A6L 3.0T, 3.2T.
  compatible with VAG 6-cyl petrol direct injection 2.8L 4V engine.

  T40079 Camshaft Adjuster Key
  Used for tensioning the timing chain via the camshaft adjuster.
  Applications:
  Compatible with Audi RS4: 2006 to Current
  Compatible with Audi A6: 2005 to Current
  Compatible with Audi 8-cyl., 4V, 4.2 l direct injection engine: 2005 to Current
  This is a high-quality aftermarket product.

DAD VW 1.5 TSI ENGINE TIMING BELT TOOL KIT VOLKSWAGEN EA211 ENGINE 1.5 TSI FOR VW GROUP PASSAT

ES.HTL-1395-6

• Applications include: Audi (from 2017), Seat (from 2017), Skoda (from 2017) & Volkswagen (from 2017).
  Engine applications include: 1.5L TSi petrol engines -DACA, DACB, DADA, DFYA, DPBA, DPCA & DPBE.
  Engine variants include: EA211, EVO 4 cylinder TSi ACT.

VOLVO XC60 ENGINE TIMING TOOL SET KIT FOR NEW VOLVO 2.0T V40 V60 V70 S60 S80 2008 TIMING TOOL

ES.HTL-1397-6

• Application: fit VOLVO B4204 engine(8-Speed Transmission), for Volvo 2.0T S60 S80 V60 V70 XC60 XC70 XC80 Engines, VM number: 9997493, 9997495 ,9997490, 9997497, 9997496
  Accurate Alignment: Specially designed to align the engine camshaft and crankshaft position, and correct into the side cover
  Complete Timing Tool Kit: This camshaft alignment tool has everything needed to hold cams, not need to buy other part any more, will help you save much money

CAMSHAFT ENGINE TIMING LOCKING TOOL KIT FOR RENAULT CLIO LAGUNA MEGANE 1.4 1.6 1.8 2.0 16V PETROL ENGINE K4J K4M F4P F4R CODES

ES.HTL-1400-6

• Application: This camshaft engine timing tool compatible with Renault Clio Laguna Megane 1.4 1.6 1.8 2.0 16V Petrol engine, fit Renault,Nissa, Vauxhall and Opel series vehicle, engine code: K4J K4M F4P F4R
  Function: This camshaft pulley setting tool holds two pulleys in place while changing the cambelt and correct, engine timing tobe performed when replace the timing belt
  High Hardness: Forged with chrome vanadium steel, high hardness, wear resistance, strong and durable, the surface is plated with anti-rust layer to prevent rust

FOR RENAULT 1.8 2.0 TIMING WHEEL LOCKING TOOL

ES.HTL-1401-6

• Function: Used to replace the timing belt, check the crankshaft to determine if it accepts a new crankshaft gear with integral wood plugs, and to release camshaft sprocket bolts that require the use of a locking device
  Application: Compatible with Renault 1.8 liter and 2.0 liter F4P/F4R twin cam engines on the entire Renault range.
  OEM Equivalent Part Number: MOT 1509-01, MOT 1801, KM-6244
  Engine Code: 1.8 16V F4P include: 720, 722, 760, 770, 771, 772, 773, 774, 775; 2.0 16V F4R include: 700, 701, 712, 713, 714, 715, 720, 722, 730, 732, 740, 741, 744, 746, 762, 763, 764, 765, 766, 767, 770, 771, 774, 776, 780, 784, 786, 787, 790, 792, 791, 792, 794, 795, 796, 797, 800, 802, 810, 811, 820, 830, 832, 867, 870, 874, 886, 887, 896, 897

ENGINE TIMING TOOL KIT FOR SYNCHRONIZING GM CHEVROLET ONIX 1.0E TRACKER 1.0 AND 1.2 LINES SYNCHRONIZER

ES.HTL-1402-6

• Special 22mm long 100mm hex wrench with double fitting, regular 1/2 square for GM Onix camshaft timing pulley actuator valve bolt, Tracker 1.0 and 1.2.
  Tool to position the camshaft of the GM Onyx and Tracker 1.0 3-cylinder and 1.2-litre 12V Turbo Ecotec engines in synchrony.
  Tool to position the crankshaft synchronously (behind the flywheel) and to lock the flywheel of GM 1.0 12V (3 cylinders) and 1.2 12V Turbo engines.
  Tool to position the crankshaft in synchronism (via the flywheel / rack) and to lock the flywheel / rack of GM 1.0 12V (3-cyl.) / 1.0 12V (3-cyl.) turbo / 1.2 12V (3-cyl) turbo CSS Prime / Ecotec engines. Application: Onix 2nd generation. / Onix Plus (sedan) 1.0 / 1.0 turbo (19>) and Tracker 3rd ger. 1.0 turbo / 1.2 turbo (20>). It comes with 2 screws and washers for attaching the tool.
  Tool to lock the pulleys with phase inverter of the camshaft, during the removal/installation of the fixing screws of the GM 1.0 12V (3 cylinders) and 1.2 12V Turbo Ecotec engines.

DIESEL CRD ENGINE TIMING TOOL FOR JEEP CHEROKEE JEEP WRANGLER CHRYSLER 2.5 2.8

ES.HTL-1403-6

• Jeep Cherokee Jeep Wrangler Chrysler 2.5 2.8

9PCS CHRYSLER TIMING CHAIN TOOL KIT FOR VW JEEP CHRYSLER DODGE 3.0 3.6L COMPREHENSIVE TIMING TOOL SET WITH CAMSHAFT LOCKING TOOL

ES.HTL-1404-6

• A Complete Set: This 3.6l Pentastar timing tool kit includes 3 x timing chain holders, 2 x phaser locks, 1 x camshaft tensioner locking pin, 2 x camshaft holding tool and 1 x crankshaft pulley wrench, and it comes with a portable case for easy carrying and storage
  Wide Application: This complete timing tool set is compatible with a wide range of 2011 to 2019 VW Chrysler Jeep Dodge Grand Cherokee Wrangler V6 3.6L pentastar engine, and compatible with Chrysler /Grand Cherokee/Durango /Ram 1500/Wrangler JL/Gladiator 3.6L WD WK JL DT engine
  Function: The camshaft phaser timing tool is used to hold the Camshaft/Phaser`s while performing the loosening and tightening of the Oil Control Valves, and used to loosen the tension on the Timing Chains during Camshaft and Phaser service procedures; This camshaft holding tool is used to hold the camshaft in a right position when adjust timing or replace timing chain; This crankshaft vibration harmonic damper holder tool is used to hold the crankshaft pulley while they pulley retaining bolt is loosened/tightened
  OEM Equivalent Part Number: 10369A, 10200A, 10200A-1, 10200A-2, 10200A-3, 10202A, 10200A1, 10200A2, 10200A3, 10198A, 10369, 2025200090
  Tips: 10200-1 & 10200-3 are used on Drivers Side, 10200-2 is used on Passenger's Side. 2012 and newer models also require 10369A. Some 2011 models may also require 10369A, depending on the size of bolt in the front cover tightening sequence on the right bank (cylinder head closest to firewall). If that bolt head is 13MM you need 10369A

FOR FIAT DOBLO CARGO 1.6 16V PETROL ENGINE TWIN CAM CAMSHAFT TIMING FITTING TOOL

ES.HTL-1405-6

• SATRA S-X16PE Timing tool set specially designed for the 1.6L 16 valve Fiat and Lancia vehicles from 1993 to 2012, for both turbocharged and normal belt driven petrol engines. Can be use in conjunction with TDC indicator (ASTA A-TP93) and dial test gauge (SATRA S-XCC) for correct cylinder positioning at top dead centre on multi valve engines within Italian vehicles. Supplied in carry case.

  Fiat
  - Brava (1995-2002) Bravo (1995-2002) Doblo (2002-2010), Doblo Cargo (2002-2010)Marea (1996-2003), Marea Weekend (1996-2003) Multipla (1999-2011)Palio Weekend (1997-2006) Siena (1997-2003) Stilo (2001-2008)

  Lancia
  Dedra (1997-1999) Delta (1996-1999) Lybra (1999-2006)

  Engine codes:
  1.6 16v - 178.B3.000, 182A4.000, 182A6.000, 182B6.000, 178B3.000
  OEM: 1.860.874.000/1.860.874.000/1.860.771.000/1.860.876.000

• TECHNICAL SPECIFICATIONS:
  Crankshaft Locking Tool (Flywheel) - Fiat Firefly 1.0 16V (3 cylinders)- 1.3 8V (4 cylinders):
  Keep the crankshaft firmly locked during timing procedures, providing increased stability and accuracy.
  Valve Timing Locking Tool:
  Application in the 1st bearing for 3-cylinder engines and in the 2nd bearing for 4-cylinder engines. This tool allows for proper locking of the camshaft, ensuring perfect synchrony.
  Tool to immobilize the Crankshaft Pulley:
  Immobilize the crankshaft pulley to accurately torque the fixing screw. This tool ensures the correct application of torque,preventing damage and providing a secure fit.
  Guide Pin (70 x 8.5mm) for Alignment of the Pulley to the Face of the Timing Cover:
  Perform precise alignment of the pulley in relation to the face of the timing cover with the help of this guide pin, ensuring correct assembly.

SUBARU DUAL-PURPOSE TIMING WRENCH (4 TEETH)

ES.HTL-1415-6

• Direct replacement for OEM part number 499977000, 499977100, 499977300 and 499977400.
  Used to check and lock the camshaft of car petrol injection engines. Perfect for timing belt service or other engine services.
  The upgraded small pin reinforcement ring will help you easily loosen the toughest crank pulley bolts.
  The integrated low-profile handle allows you to effortless & properly remove your crank pulley with the radiator still in the car.
  Wide Application:
  Fits for 1993-2015 Subaru Imprezas (For EJ engines only);
  Fits for 1994-2012 Subaru Legacys and Outbacks;
  Fits for 1998-2009 Subaru Foresters;
  Fits for 2010-2013 Subaru Forester XT;
  Fits for 2004-2006 Subaru Baja;
  Fits for 1991-1996 Subaru SVX;
  Fits for 2005-2006 Saab 9-2X.
  Easy Installation:
  Easy to assemble and use. Simply install it on the harmonic balancer for Subaru Outback, combined with the tight ratchet, socket and an excessively long pipe on the ratchet was able to remove the harmonic balancer easily.
  Package Includes: 8 x Removable Pins, 1 x Crank Pulley Tool and 1 x Reinforcement Ring

SUBARU TIMING WRENCH (SPECIAL TEETH)

ES.HTL-1416-6

• Different types and models of engines require the use of appropriate timing tools.
  The timing tools should be properly stored after use.
  The timing tool must be used together with other tools, such as wrench and torque wrench.
  Engine timing tools usually need to be used in conjunction with other service tools and equipment.
  The tool is made of high strength material

ENGINE TIMING TOOL FOR SUBARU 2.0 2.5L CAMSHAFT FIXING TOOL

ES.HTL-1417-6

• The camshaft calibration fixture is specifically designed to align the camshafts for the 2.0L and 2.5L DOHC turbine engines during the timing belt, cylinder head or other front engine service tasks for Subaru.
  The tool locks the position of the left camshaft and prevents the cam sprockets from spinning to avoid catastrophic damage to the piston in contact with the valve when the timing belt is removed.
  Wide Application:
  Fits for 2002+ Subaru Impreza WRX and WRX STI with 2.0L or 2.5L DOHC Turbo engines (EJ205, EJ207, EJ255, EJ257);
  Fits for 2004-2011 Subaru Forester XT with DOHC Turbo engines;
  Fits for 2005-2010 Subaru Legacy GT with DOHC Turbo engines;
  Fits for 2005-2010 Subaru Outback XT with DOHC Turbo engines;
  Fits for 2005-2006 Saab 9-2X Aero with DOHC Turbo engines;
  Fits for 2004-2006 Subaru Baja with DOHC Turbo engines.

HONDA TIMING TOOL FOR 1.6/1.8/2.0/2.2/2.3/3.0 ENGINES

ES.HTL-1420-6

• It's compatible with a wide range of Honda engine models, including 1.6L, 1.8L, 2.0L, 2.2L, 2.3L, and even 3.0L, covering most Honda models on the market.
  This tool's design fully considers the characteristics of different engines. Whether replacing a timing chain or adjusting a tensioner, the S2002 provides reliable support. Every detail has been meticulously crafted to ensure excellent performance in challenging working environments.

GASOLINE TIMING TOOL FOR HYUNDAI, MITSUBISHI, AND PROTON 1.6, 1.8, 2.0, 2.4, 3.0, AND 3.5 ENGINES

ES.HTL-1447-6

• Designed specifically for adjusting the engine timing of gasoline engines.
  Applicable to: Hyundai 1.6/1.8/2.0/2.4 twin-cam

FORD KUGA TIMING TOOL (10-PIECE SET)

ES.HTL-1470-6

• Yuesstloo engine camshaft belt timing locking tool kit is used to lock the camshafts and accurately position, align hold your engine at TDC to perform service when the engine needs to be removed and timed.
  Compatible with FORD 1.25L, 1.4L, 1.6L, 1.7L, 1.8L, 2.0L twin cam 16V, 2.3L (not fit 2.3T), 2.5L, 1.6L TI-VCT, 1.5L/1.6L VVT EcoBoost engines. And compatible with most 1993-2020 Ford 1.5L and 1.6L engines.
  Fit Vehicle Models Include Ford: B-Max, C-Max, Escape 1.5L, Fiesta, Focus, Mondeo, S-Max, Galaxy, Transit 2.3L, Transit 1.6L EcoBoost, Puma, Escort, Tourneo Connect, Mondeo Hybrid, Maverick, Fusion, VCT EcoBoost, Kuga, Transit Connect, Transit Courier, 1977-1986 Ford Transits. Mazda: MPV, Tribute, Mazda 3.
  Comes with a heavy-duty carrying case, includes timing belt tensioner 303-1054, flywheel timing pin 303-1059, crankshaft timing pin 303-748, camshaft sprocket timing pin 303-735, crankshaft timing pin 303-620, camshaft positioning plate 303-376, camshaft setting bar 303-1552, crankshaft shock absorber 303-1550, camshaft sprocket locking tool 303-1097 and a pair of gloves that you can wear when you are using these tools. Convenient to store and operate.
  Made of premium corrosion-resistant materials, coated with black anti-oxidation layer, anti-rust, strong, high hardness. Customer Satisfaction Service: If there is any problem with our products, you can get help from us.

FORD EDGE 3.5, 3.7, AND 4.0 ENGINE TIMING TOOL SET (FOUR-PIECE PLASTIC CASE)

ES.HTL-1471-6

• Yuesstloo camshaft holding tool kit can help vehicle maintenance effectively and is easy to use, simplify your timing chain work. You can use it to accurately position and alignment for Ford 3.5L and 3.7L camshafts at the TDC to perform repairs during removal and installation of the timing chain.
  This tool is designed specifically for Ford V6 3.5L and 3.7L Cyclone engines, making it compatible with a wide range of models, including Ford Edge, Explorer, F-150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus; Lincoln MKS, MKT, MKX, MKZ, Navigator; and Mercury Milan, Sable, and Taurus X. It replaces part numbers 303-1248, 303-1530, and RT11. (OTC 6682)
  Made of high-quality steel and coated with black oxide finish, anti-rust, wear-resistance, with high hardness, high precision and great compatibility.
  Customer Satisfaction Service: If there is some problem with our camshaft holding tool kit, you can get help from us. Customer satisfaction is our top priority.

FORD RAPTOR F-SERIES ECOBOOST ENGINE 4.0 CAMSHAFT ALIGNMENT TIMING GEAR TOOL FOR FORD

ES.HTL-1472-6

• 303-1655 303-1633 Camshaft Alignment Tool Vibration Damper Pulley Holder Compatible with Ford 3.5L EcoBoost V6 Upgraded F-150 Lincoln Navigator Roller Rocker Follower Remove Install Timing Tool Kit
  Complet Timing Tool Kit: this include camshaft alignment tool 303-1655; Crankshaft pulley holding wrench; camshaft roller follower 303-1633. this kit have everything for engine timing
  Applicable: This camshaft alignment tool compatible with Ford 3.5L V6 EcoBoost engine, compatible with Ford GT (2017-2019); Expedition equipped with 3.5L V6 EcoBoost upgraded engine (2018-2019); F-150 equipped with 3.5L V6 EcoBoost upgraded engine (2017-2019); compatible with Lincoln Navigator equipped with 3.5L V6 EcoBoost upgraded engine (2018-2019)
  for Ford 3.5TT V6 EcoBoost Engine: F-150 frequent abnormal noises during startup or idle, that is 3.5TT V6 EcoBoost engine common failing, so, need replace VVT wheel and timing chain, this kit is speciall desiagn to alignment camshaft and holding crankshaft pulley when replacing timing chain
  with Roller Rocker Follower Tool: 303-1633 specially design to remove install roller rocker follower
  Tips: 303-1655 is only cam alignment tool, you need use the crankshaft pulley holder to hold pulley when remove phasers, otherwise, 303-1655 will be bent

ENGINE TIMING LOCKING SETTING TOOLS SET KIT FOR FORD 1.0 ECOBOOST FIESTA TIMING TOOLS

ES.HTL-1473-6

• Applicable Vehicle: Compatible with Ford 1.0 turbo, 3 cylinder, Ecoboost(belt in oil) petrol engine,Compatible with Ford Fiesta, EcoSport, Focus, B-Max, Transit Courier, Traisit Connect, C-Max, Tourneo Connect, Grand C-Max
  OEM Equivalent Part Number: fit engine: 1.0 EcoBoost, 1.0 SCTi EcoBoost. engine code:M1DA, P4JA, XMJA, M1JA, P4JB, XMJB, M2DA, SFJA, M2GA, SFJB. replace OEM :303-1605/1; 303-1605/2; 303-1606; 303-1604; 303-1602; 303-73; 303-1054
  Professional Timing Tool for Ford 1.0: This timing tool could effectively adjust camshaft, and help you easy repalce timing belt, is a must tool for ford 1.0 timing
  As Fitment As OEM: All tools have undergone rigorous engine testing, to ensure that the timing tool can be perfectly adapted to the engine, as same as the OEM

FORD 2.0 DIESEL ENGINE TDCI TIMING TOOL

ES.HTL-1474-6

• Professional Timing Tool Kit--The timing tool kit is designed specifically the latest for Ford 2.0T EcoBlue TDCi diesel engine, which is same as the models for EcoBoost that the timing belt runs in oil. The kit contains the special tools necessary to lock the engine in the timing position, and the tools to install the timing belt onto the camshaft. We recommend using tool part no. 118810 to replace the fuel pump.
  Motor Code-- BCCC, BCCD, BCDA, BCFA, BCFB, BCFC, BCFD, BCRA, BJFA, BJFB, BJFC, BJFD, BJRA, BKFA, BKFB, BKFC, BKFD, BKRA, BKRB, BLFA, BLFB, BLFC, BLFD, BLHA, BLRA, BLRB, YLCB, YLCC, YLDA, YLF6, YLFA, YLFB, YLFS, YLR6, YLRA, YMCB, YMCC, YMF6, YMFA, YMFB, YMFS, YMHA, YMR6, YMRA, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6, YNRA
  Applicable Models--This diesel timing tool kit is only compatible with models equipped with the 2.0 TDCI diesel engine, including: compatible for Ford Transit, for Transit Custom, for Touareg Custom: AWD, FWD, RWD 2016 and up. For Ford Focus (2018+), for Ford Galaxy (2018+), for Ford S-Max (2018+), for Ford Ranger (2019+), for Ford Transit (2016-2018), for Ford Transit Custom (2016-2019), for Ford Touareg Custom (2016-2018).
  New Generation Engine Adjustment Tool --The engine camshaft adjustment kit includes all the accessories needed to replace the timing belt tool: Installation cups (OEM 303-1650), Flywheel locking tool (OEM 303-1643), Crankshaft alignment tool (OEM 303-1637). Camshaft timing pins, all parts can be precisely matched to each other.
  Durable Material --This engine camshaft adjustment tool for Ford is made of high quality carbon steel, rigorously heat-hardened and rust-proofed for durability and longevity. Comes with a plastic case, all parts are properly packed in the plastic case for easy storage and transportation. Please note the specifications of this timing tool kit and make sure this is the product you need before purchasing.

CAMSHAFT TIMING LOCKING TOOL FOR FORD 1.0L ECOBOOST VERSION PETROL ENGINE FROM 2018 REPLACE 303-1661 303-1643 303-018

ES.HTL-1475-6

• 【Application】 Compatible with Ford latest version 1.0L Ecoboost petrol engine, old engine is oil wetted cam belt drive, the latest is chain driven, so the the timing tool is different, this timing tool specially design for post 2018 chain driven engine, apllicable engine code: B7DA, B3DA
  【Compatible】 Compatible with Ford C-Max from 2017; compatible with Focus from 2018; Compatible with Transit Connect from 2017; compatible with Puma from 2019; Compatible with Fiesta from 2017
  【OEM Requivalent Part Number】 303-1661-1; 303-1661-2; 303-1661-3; 303-1643; 303-018; 303-1604; 303-732; 303-1603

FUEL INJECTOR PUMP REMOVER INSTALLER TOOLS SET KIT FOR FORD 2.0 ECOBLUE TDCI ENGINE 303-1635

ES.HTL-1476-6

• For Ford Diesel 2.0D EcoBlue High Pressure Fuel Pump Remover Installer
  Function: designed for removal and replacement of high pressure fuel pump for 2.0 Ecoblue TDCi engine
  Applicable: compatible with Ford Transit, TransitCustom and Tourneo Custom with 2.0 Ecoblue TDCi engines, AWD, FWD, RWD from
  2016
  Engine Codes: YLFS, YMFS, YNFS, YLF6, YMF6, YNF6, YLR6, YMR6, YNRS
  OEM Equivalent Part Number: 303-1635
  Product Description
  Applicable Engine: compatible with Ford 2.0 Ecoblue TDCi engines, AWD, FWD, RWD from 2016.
  Applicable Vehicle Model:
  compatible with Ford Transit, Transit Custom and Tourneo Custom with 2.0 Ecoblue TDCi .
  Engine Codes: YLFS, YMFS, YNFS, YLF6, YMF6, YNF6, YLR6, YMR6, YNRS.
  OEM Equivalent Part Number: 303-1635.

FORD KUGA AND NEW FOCUS ENGINE TIMING TOOL SET (11 PIECES

ES.HTL-1477-6

• The handle is designed according to the structure of the human hand to fit the grip habit, reduce hand fatigue, and keep comfortable for a long time.
  With strong wear and fatigue resistance, long-term use can still maintain accuracy and functionality.
  Made of high-quality materials, can withstand high intensity frequent use, greatly extend the service life of the tool.
  The operation is flexible and smooth, the tool opens and closes smoothly, and the operation feel is flexible.
  Carefully designed, accurately fit the vehicle model, match the maintenance needs.

FORD 1.5 THREE-CYLINDER ENGINE BELT TIMING TOOL

ES.HTL-1478-6

• Ford 1.5T Three Cylinder Belt Machine Timing Tool
  Ford(oem 303-1639 303-1647 1.5T Clinder Belt Timing

FOR FORD ECOSPORT FIESTA FOCUS 1.5L DURATEC 3-CYLINDER ENGINE CAMSHAFT TIMING TOOL WITH CRANKSHAFT FRONT OIL SEAL TOOL

ES.HTL-1479-6

• For Ford Ecosport Fiesta Focus 1.5L Duratec 3-Cylinder Engine Camshaft Timing Tool With Crankshaft Front Oil Seal Tool
  Compatible with 2018-19 Ford Eco Sport Engine-1.5L Duratec (90kW / 120PS)，repaired on TDC.Three-cylinder belt engine timing tool

ES.HTL-1480-6

• For Ford Volvo 1.5T 1.6T 2.0T Jaguar Land Rover Evoque 2.0T Engine Timing Tool Set
  Ford(Compatible with Ford: This camshaft timing tool compatible with ford 1.5 1.6 2.0 Ecoboost engine, compatiblewith Ford 1 .6
  Ti-Vct,
  1.5/1.6 VV'T Ecoboost, compatible with Ford 2.0L Ecoboost petrol engine from 2010Compatible with Volvo: Compatible with Volvo V4,
  1.6L, 2.0L T4, T5 engineCompatible with Land Rover: Compatible with jaguar/Land Rover 2.0 GTDi and Si4 engine. fit Land
  RoverDiscovery $port Si4 from 2015, Freelander 2 Si4 from 2012; Range Rover Evoque Si4 from 2011; Jaguar XF GTDifrom 2012,XE fom
  2015, XJ from 2012)

ENGINE CHAIN TIMING TOOL FOR 2020 FOCUS FORD ESCAPE 3 CYLINDER 1.5T ECOBOOST ENGINE

ES.HTL-1481-6

• For Ford Ecosport Fiesta Focus 1.5L Duratec 3-Cylinder Engine Camshaft Timing Tool With Crankshaft Front Oil Seal Tool
  Compatible with 2018-19 Ford Eco Sport Engine-1.5L Duratec (90kW / 120PS)，repaired on TDC.Three-cylinder belt engine timing tool

CHANGAN FORD LINCOLN 2.0T AND 2.3 ENGINE TIMING TOOL

ES.HTL-1482-6

• Camshaft Holding Alignment Timing Kit Crankshaft Damper Holder Balance Shaft Preload Tool VCT Solenoid Seal Installer Compatible with Ford 2.0 2.3 303-1551 303-1685 303-1686 303-1687 303-1688 303-1689
  OEM Equivalent Part Number: 303-748, 303-1551, 303-1685, 303-1686, 303-1687, 303-1688, 303-1689
  Applicable : 303-1685 compatible with Ford 2.0L 2.3L EcoBoost from 2019,compatible with Ford Edge 2.3L, compatible with Ford Ranger 2.3L, compatible with LincoIn 2.0L
  303-1685 compatible with Ford 6.0L 6.4L diesel engine, compatible with Ford E150 E250 E350 E450 F250 F450 F550 F650/750 with 6.0L 6.4L diesel engine
  Function: use for aligning or holding the camshaft in right position, holding the crankshaft damper, when replace timing chai or adjust timing. Install VCT solenoid seal
  Timing Kit: this kit include camshaft alignment tool; camshaft holding tool; VCT Solenoid Seal Installer; balance shaft preload tool; crankshaft damper holding tool; adapter tool.

FORD 1.0 CRANKSHAFT PULLEY REMOVAL TOOL AND TORQUE AMPLIFIER

ES.HTL-1483-6

• Engine Crankshaft Belt Pulley Removal Tool for Ford 1.0 & 1.1 ECOBOOST Torque Multiplier Tool Set
  The tightening torque of the crankshaft bolt is so high, that it is essential to be equipped with this tool.
  The torque multiplier is critical to the proper removal and installation of the crankshaft pulley bolt on Ford 1.0L - 1.1L Ecoboost engines.

  Impressive Torque: This tool offers a max torque input of 300 Nm, and it provides a max torque output of a substantial 1,500 Nm. With a gear ratio of 1:5, it multiplies your input torque effectively, making light work of challenging tasks.

  Application：Ford 1.0 Eco Boost Model
  Ford B-Max (2013-2017)
  Ford C-Max (2012-2017)
  Ford EcoSport (2013-2017)
  Ford Fiesta (2013-2017)
  Ford Focus (2012-2017)
  Ford Grand C-Max (2012-2017)
  Ford Grand Tourneo Connect (2013-2015)
  Ford Mondeo (2015-2017)
  Ford Tourneo Connect (2013-2016)
  Ford Tourneo Courier (2012-2016)
  Ford Transit Connect (2015-2017)

FOR FORD DIESEL ENGINE TIMING TOOL TIMING FORD 2.0 2.2 2.4 3.2L CRANKSHAFT PULLEY HOLDING TOOL KIT

ES.HTL-1484-6

• Timing Chain Setting / Locking Kit contains the tooling required when removing and installing the engine timing chain on all 'Puma' Duratorq diesel engines, including 2.0, 2.2, 2.4 and 3.2 TDCi and TDdi variants fitted in vehicles from 2000 onwards.
  This range of engines has been fitted to a number of light commercial vehicles including Ford Transit & Transit Custom, Citroën Relay, Peugeot Boxer, Fiat Ducato as well as passenger vehicles such as Ford Mondeo, Jaguar X-Type, London Taxi and Land Rover Defender.

  This kit covers front and rear wheel drive vehicles as well as engines with chain driven or camshaft driven fuel pumps. Alsoincluded within the kit are the oil pump setting tool, required for the correct installation of the oil pump and a flywheel locking tool, used for any application requiring the crankshaft to be locked in position

FORD 2.0 DIESEL FUEL INJECTOR REMOVER

ES.HTL-1485-6

• For extracting diesel injectors in one piece, allowing them to be refitted.
  Applications include: Ford Edge, Focus, Galaxy, S-Max (from 2018); Kuga, Mondeo, Ranger (from 2019); Tourneo, Transit (from 2016).
  Engine applications include: 2.0L EcoBlue diesel engines.
  Equivalent to OEM 303-1706. Applied torque must not exceed 250Nm.

FOR VOLVO V40 S40 S60 XC90 CAMSHAFT LOCKING TIMING TOOLS 2.0T 2.4L 2.5T 2.9T

ES.HTL-1486-6

• Camshaft Crankshaft Timing Belt Locking Tool Kit Compatible with Volvo C70 S40 S60 S80 XC90 2.0 2.3 2.4 2.5 2.8 2.9T 4 5 6 Cylinder Engine Replace 9995451 9995452
  Function: This tool is used to hold the camshaft in a specific position, ensuring that the grooves are aligned with the camshaft, making it easier to remove and install camshaft belts without causing damage to other components, as well as increasing work efficiency
  Application: Compatible with Volvo 2.0, 2.3, 2.4, 2.5, 2.8, 2.9, 3.0, 3.2, 4-cylinder, 5-cylinder, and 6-cylinder engine; Compatible with Volvo 850, 960, C30, C70, S40, S60, S70, S80, S90, V40, V50, V70, V90, XC70, XC90
  OEM Equivalent Part Number: 9995452, 9995451. As precise as OEM, making engine timing easier and more convenient
  High Quality Material: Made of high quality steel, it is sturdy and durable, resistant to corrosion and oxidation, and not easily damaged
  Packaging Includes: 9995451 camshaft holder, 9995452 crankshaft timing tool, 2pcs camshaft extensions, 4pcs bolts and a portable case

ES.HTL-1487-6

• Engines:
  - Suitable for 4, 5 & 6 cylinder engines
  Models:
  - 850, 960, S40, S70, S90, 700, 800, 850, 900, 960, C70 Coupe and Conv, S40, S60, S70, S80, S90, V70-2000, V70XC, XC70, V90, XC90;
  Suitability by year of manufacture:
  - S80 (07-), V70 (08-), S80 (-06), XC90, V70 (00-08), V70 XC (01-) / XC70 (-07), S60, C30, C70 (06-), S40 (04-), V50, S40 (-04),
  V40, 850, C70 Coupe (-02), C70 Conv (-05), S70, V70 (-00), V70 XC (-00), 960, S90, V90
  Engine codes:
  - B41XX, B42XX, B52XX, B62XX, B63XX, GB5252S
  Exact engine codes:
  - B4164S, B4164S2, B4184S, B4184S10, B4184S2, B4184S3, B4184S9, B4184SJ, B4194T, B4194T2, B4204S, B4204S2, B4204T, B4204T2,
  B4204T2 CVVT, B4204T3, B4204T3 (USA)(CDN), B4204T4, B4204T5, B5202FS, B5204FS, B5204FT, B5204T2, B5204T3, B5204T4, B5204T5,
  B5234FS, B5234FT, B5234T2, B5234T3, B5234T4, B5234T5, B5234T6, B5234T7, B5234T8, B5234T9, B5244S, B5244S4, B5244S5, B5244S6,
  B5244S7, B5244SG, B5244SG2, B5244T, B5244T2, B5244T3, B5244T4, B5244T5, B5244T7, B5252FS, B5254FS LH 3.2 , B5254FS M 4.3, B5254F
  Volvo part numbers:
  - 999-5454, 999-5453, 999-5452, 999-5451
  The kit includes:
  - 2- 9995454, 1- 9995452, 1- 9995453, 9995254, 1- 9995451

VOLVO T4/T5 TIMING TOOL

ES.HTL-1488-6

• For Mazda Volvo 1.6L 2.0L T4 T5 S60 S80 V40 V60 V70 XC60 Engine Timing Tool Kit
  The comprehensive the setting and locking kit covers the engine, which has fitted to a large range of Fo-rd, Vo-lvo and some Mazda vehicle.
  Contain the time saving tool correctly align the timing cover on Fo-rd and Vo-lvo engines and the crankshaft pulley holder for Mazda engine.
  Suitable Car Model:
  For Ford
  For Ford Fiesta (08-15)
  For Ford B-Max (12-15)
  For Ford C-Max (03-07)
  For Ford C-Max (07-10)
  For Ford C-Max (10-15)
  For Ford Focus (04-11)
  For Ford Focus (11-15)
  For Ford Grand C-Max (10-15)
  For Ford Tourneo Connect (13-15)
  For Ford Grand Tourneo Connect (13-15)
  For Ford S-Max (10-15)
  For Ford Galaxy (10-15)
  For Ford Kuga (13-15)
  For Ford Transit Connect (13-15)
  For Volvo
  For Volvo S80 (09-14)
  For Volvo V40 (09-14)
  For Volvo V40 Cross Country (10-14)
  For Volvo XC60 (09-14)
  For Volvo S80 (09-14)
  For Volvo V60 (10-14)
  For Volvo V70 (09-14)
  For Volvo S60 (11-11)
  For Mazda
  For Mazda 5 (CW) (10-15)
  For Mazda 6 (GH) (10-13)
  1.6L Engine Code：
  B4164T, B4164T2, B4164T3, HXDA, HXDB, HXJA, HXJB, IQDA, IQDB, IQJA, JQDA, JQDB, JQGA, JQMA, JQMB, JTDA, JTDB, JTJA, JTMA, JTWB,
  MUDA, PNDA, RVJA, SIDA, U5JA, XTDA
  2.0L Engine Code:
  B4204T6, B4204T7, B4204T7 (MZRDIDSI), MGDA, MZR 2.0 (LF), R9DA, TNBA, TNBB, TNWA, TNWA, TPBA, TPWA, ZQDA
  Specifications:
  Condition: 100% Brand New
  Camshaft Alignment Plate >05-11: for Ford 303-1565
  Camshaft Alignment Plate >05-11: for Ford 303-1504, Volvo 999-7405, Mazda 303-1061
  Crank Sensor Alignment Tool: for Ford 303-1521, Volvo 999-7416
  Crankshaft Timing Pin: for Ford 303-748, Volvo 999-7406, Mazda 303-507
  Tensioner Pin (Ø2mm): for Ford 303-1054
  Camshaft Sprocket Alignment Plate: for Ford 303-1097, Volvo 999-7429
  Crankshaft Pulley Alignment Plate: for Ford 303-1550, Volvo 999-7431
  Crankshaft Pulley Alignment Plate: for Mazda 205-072

NEW VOLVO 3-CYLINDER 1.5T TIMING TOOL 9997680 9997675 9997676

ES.HTL-1489-6

• Application: Compatible with New Volvo 1.5T 3 Cylinder Engine
  Function: This timing tool could effectively adjust camshaft, and help you easy repalce timing belt
  OEM Equivalent Part Number: 999768021, 999767621, 999767521
  Durable: Made of high quality materials with high hardness and durability, and heat-treated and forged many times, it is not easy to be damaged, will extend its service life

VOLVO NEW S60/XC90 48V MILD HYBRID 2.0T B5 TIMING TOOL, B420T2 CRANKSHAFT RETAINER

ES.HTL-1490-6

• Volvo New S60 XC90 48V Hybrid Power 2.0T B5 Timing Tool B420T2 Crankshaft Holder Wrench
  Hold & Lock Crankshaft Pulley To Remove Center Bolt for Timing Belt and Seal Replacement.